Advertisement
Remove the stabiliser bar complete with bushes.
Note the respective positions and orientation of the bushes and the bar, then remove the bushes from the
stabiliser bar.
Refitting the front stabiliser bar
Tightening torque
Fastening front stabiliser bar - spherical tie-rod
Fastening the front stabiliser bar
UP TO Assembly No. 103178 (consult the Spare Parts Catalogue to identify vehicles not affected by
modification)
Undo the screws indicated.
Remove the bracket (B) from the respective
rubber bush (C).
Remove the bracket (D) retaining the bush (C).
Undo the screws indicated.
Remove the bracket (B) from bush (C).
Remove the bracket (D) retaining the bush (C).
Nut
Screw
Nm
Class
50 Nm
B
30 Nm
B
Advertisement
