Advertisement
Check that there are no leaks from the drain plug and engine oil filter.
Refit the central flat undertray section (
Filling the engine lubrication system (Applicable FROM Engine No. 153879)
Tightening torque
Oil draining cap
Clean the plug (A) thoroughly with a suitable
degreaser that does not leave residue.
Tighten the plug (A), replacing the relative seal.
Tightening torque
Magnetic cap M22x1.5
Undo and remove the cap (B).
Fill the engine lubrication system using only
new oil of the type specified in the fluids
and lubricants table.
Gradually add new oil of the specified type via
the filler neck.
Due to inevitable pooling within the lubrication
system, the actual quantity of oil added may
vary from vehicle to vehicle.
Fully tighten the engine oil filler cap (B).
Check the engine oil level (
E3.12).
Magnetic cap M22x1.5
Nm
Class
60 Nm
A3.01).
Nm
Class
60 Nm
B
B
Advertisement
