Advertisement
Support the weight of the silencer (B).
Fit the rear bracket (A), aligning the reference
markings.
Fit the plate (2).
Tighten the nuts indicated.
Tightening torque
Nut
Never reuse exhaust system clamps and
gaskets that have been subjected to
operating temperature. Always replace
with new components.
Only new exhaust system clamps and
gaskets may be removed and refitted for
adjustment purposes during initial
installation.
Replace and fasten the spherical clamp (1),
tightening the indicated screw.
Tightening torque
Spherical clamp
Tighten the indicated screw.
Tightening torque
Screw
Nm
Class
25 Nm
B
Nm
Class
35 Nm
B
Nm
Class
25 Nm
B
Advertisement
