Advertisement
With any currently active screen, when the instrument panel receives the signal from the electronic control
unit indicating that the pressure of more than one tyre is below the warning threshold, the TFT display
displays the specific message "Check tyre pressure" in area B2 of the screen together with the vehicle
symbol in area B1 indicating tyre pressures.
The background of the box indicating the pressure and relative unit of measurement for the faulty tyre turns
amber.
The display cycle is 20 seconds, after which time the specific screen disappears.
At key-off, no information is displayed but the function continues to monitor tyre pressure while the vehicle is
parked.
If the fault persists at the subsequent key-on, the specific screen is shown again on the display.
TYRES screen: the driver may recall the screen by pressing the DISP button, enabling the driver to identify
the tyres with insufficient pressure at any time. When the system cannot recognise which wheel is
generating the failure signal, as the respective values cannot be displayed by the TYRES screen, the
screen is not recallable by the driver.
- TPMS not calibrated
Advertisement
