Advertisement
Refit the rear seats (
For vehicles in "2+2 seat" configuration.
Refit the luggage bench (
For vehicles in "2 seat" configuration.
Connect the battery (
Fill the fuel tank.
Connect the DEIS tester to the diagnostic socket (
Perform the "NCM Short trip sequence: leak detection monitoring" cycle.
Replacing the fuel pump
CAUTION
FUEL IS HIGHLY FLAMMABLE.
NEVER WORK ON A HOT ENGINE.
TO PREVENT FIRE RISKS AND FUEL LEAKAGE, WORK ONLY ON A COLD ENGINE WITH AN EMPTY
FUEL TANK.
E4.01).
E4.01).
F2.01).
Check that the mating surfaces of the fastener
ring (6) are clean.
Orienting correctly, fit the fastener ring (6) and
tighten the indicated fastener screws.
Tightening torque
Screw
Connect the pipe (5), fastening the indicated
union.
Connect the ground cable (4), tightening the
indicated nut.
Connect the connector (3).
Fit the cap (2).
Fit the cap (1).
F2.10).
Nm
Class
5 Nm
B
Advertisement
