Advertisement
Never reuse exhaust system clamps and
gaskets that have been subjected to
operating temperature. Always replace
with new components.
Only new exhaust system clamps and
gaskets may be removed and refitted for
adjustment purposes during initial
installation.
Align the exhaust extensions (D) correctly with
the silencers (E) and install a new spherical
clamp (3).
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Tighten the Torx clamp (6).
Tightening torque
Torx clamp
Fit the damper (7) on the centre silencer and
fasten by tightening the nuts (5).
Tightening torque
Nut
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Tighten the Torx clamp (6).
Tightening torque
Torx clamp
Nm
Class
54.2 Nm
B
Nm
Class
25 Nm
B
Nm
Class
54.2 Nm
B
Advertisement
