Advertisement
The following procedure is for removing the right hand rear hub carrier.
The procedure for removing the left hand rear hub carrier is the same.
Remove the rear brake callipers (
Remove the brake discs (
Remove the rear brake disc.
Remove the EPB electric parking brake shoes (
Remove the rear wheel ABS sensor (
Support the weight of the suspension adequately.
D3.05).
D3.03).
D3.06).
D3.07).
Whenever the nut and/or the screw fastening
the lower rear suspension arm is or are
removed, ALWAYS REPLACE BOTH the
nut and the screw with new parts when
reassembling.
Preventing the screw (1) fastening the lower arm
(A) to the hub carrier from turning, undo the
nut (2).
Remove the screw (1) from the relative seat and
retrieve the relative washers.
Preventing the screw (3) fastening the toe-in tie-
rod (B) to the hub carrier from turning, undo
the nut (4).
Remove the screw (3) from the relative seat and
retrieve the relative washers.
Advertisement
