Advertisement
Carefully remove the power window unit from the relative seat, removing first the rear guide and then the
motor and the front guide from the relative recess.
Take particular care not to damage the Bowden cable sheath.
Carefully fit the new power window unit in the relative seat, fitting first the front guide and then the motor
and the rear guide in the relative recess.
Disconnect the connector (4) from the power
window unit microswitch.
The connector (4) is fastened to the interior of
the door frame.
Replace the power window unit, installing the
new power window unit as shown in the
image aside.
Connect the connector (4) to the power window
unit microswitch.
The connector (4) is fastened to the interior of
the door frame.
Advertisement
