Advertisement
Never reuse exhaust system clamps that have been subjected to operating temperature. Always replace with new
components.
New clamps may only be removed and refitted for adjustment purposes during initial installation.
Refit the centre silencer (
Replace all clamps that have been loosened, and hand-tighten the respective screws and nuts.
B7.04).
Check that the front edges of the central silencer (A) are aligned
with the markings indicated on the catalytic converters (B).
Only in the event of misalignment of the catalytic converters
along the "Z" axis
Loosen the indicated nuts fastening the catalytic converters (B).
Only in the event of misalignment of the catalytic converters
along the "Z" axis
Loosen the indicated nut on both clamps (2).
Advertisement
