Advertisement
Refitting the front shock absorbers
Tightening torque
Check again that the yellow reference markings
are correctly aligned: the markings on the
stud bolts and the markings on the Flanbloc
eyebolts must be aligned.
Holding the pin (3) fastening the shock absorber
to the lower arm still, undo the nut (4) and
retrieve the relative washer.
Support the weight of the shock absorber (A)
and remove the pin (3) from the relative seat.
Remove upper arm (B) from the relative stud
bolts, retrieving the washers, and turn it
slightly towards the front of the vehicle.
Remove the shock absorber (A) from the relative
seat.
Nm
Class
Advertisement
