Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Disconnect the connector (14) from the shock
absorber (B).
Magnetorheological shock absorbers (optional)
only.
Support the weight of the complete suspension
adequately.
Undo the indicated screws fastening the shock
absorber (B) to the chassis.
Using a delible yellow marker pen or paint, make
reference markings on the threaded bolts and
relative nuts and the eyebolts fastening the
toe-in tie-rod.
DO NOT use lubricants or electric/pneumatic
drivers.
Partially loosen the indicated nuts fastening the
toe-in tie-rod (C) to the chassis.
Undo the nut indicated fastening the stabiliser
bar (D) to the spherical tie-rod.
Advertisement
