Advertisement
C2.06
Draining and filling with Shell Transaxle 75W-90 GL5 gear oil
Draining the Shell Transaxle 75W-90 GL5 gear oil
The gear oil must be changed at the intervals specified in the MAINTENANCE SCHEDULE.
Remove the rear flat undertray section (
E3.12).
Place a container under the plugs indicated in
the figure to collect the oil.
Undo the plugs (1) and (2) at the bottom of the
gearbox housing.
ALWAYS dispose of liquids correctly in
accordance with applicable legislation.
Collect all liquids drained from the vehicle
systems in appropriate airtight containers,
then close the containers.
Drain the oil completely.
ONLY for vehicles WITHOUT single oil heat
exchanger
Remove the gear oil pipe mounting bracket (3),
undoing the screws indicated.
Remove the pipe retainer clamp (4) from the
bodyshell.
Detach the gear oil pipe unions (5).
Advertisement
