Advertisement
Fit the lower front suspension arm (A) in its
relevant seat.
Apply the nut (4), after fitting the relevant
washer, and pretighten.
Tightening torque
Nut (pretightening)
Loosen the nut (4) and then tighten.
Tightening torque
Nut
Fit the pin (3) fastening the shock absorber to the
lower arm and, after fitting the relevant
washer, tighten the nut (2).
Tightening torque
Nut
Fasten the spherical tie-rod to the lower arm (A),
tightening the pin (1).
Tightening torque
Spherical tie-rod
Nm
Class
90 Nm
A
Nm
Class
63 Nm
A
Nm
Class
80 Nm
A
Nm
Class
50 Nm
B
Advertisement
