Advertisement
The procedure for refitting the internal scraper seal for the left hand door window is the same.
Refit the door panel (
Removing the door window
Lift the door window completely with the relative control.
Remove the door panel (
E3.08).
E3.08).
Fit the internal window scraper seal (A) in the
relative seat on the door subframe and insert
the upper part.
Tighten the upper screw (1) fastening the internal
door window scraper seal (A).
Fit the lower part of the internal door window
scraper seal (A), fitting the relative fastener
pegs in the door subframe.
Advertisement
