Advertisement
Tightening torque
Fastening shock absorber to lower arm
Fastening upper arm to chassis
Fastening shock absorber to chassis
Fastening shock absorbers to chassis (FROM
Assembly No. 103179)
The following procedure is for refitting the right hand front shock absorber.
The procedure for refitting the left hand front shock absorber is the same.
Nut
Nut (pretightening)
Nut
Screw (pretightening)
Screw
Screw (pretightening)
Screw
Fit the shock absorber (A) in the relative seat.
Fit the washers and the upper arm (B) onto the
relative stud bolts, turning the arm towards
the rear of the vehicle.
Support the weight of the shock absorber (A)
and fit the pin (3) into the relevant seat.
Holding the pin (3) fastening the shock absorber
to the lower arm still, fit the relevant washer
and tighten the nut (4).
Tightening torque
Nut
Nm
Class
80 Nm
A
25 Nm
A
60 Nm
A
10 Nm
A
30 Nm
A
20 Nm
A
110 Nm
A
Nm
Class
80 Nm
A
Advertisement
