Advertisement
Filling the power steering system
Tightening torque
Fastening union connecting pump pipe - steering
box
FROM Assembly No. 98002, a different power steering fluid is prescribed.
The power steering fluid specified FROM Assembly No. 98002 must be used following installation of
the components of the RETROFIT KIT Part No. 279663.
Before topping up or filling the power steering system, always check which type of fluid should be
used, as mixing the two different types of power steering fluid will damage the power steering
system itself.
The power steering system is self-bleeding.
Remove the power steering tank (
Clean the interior of the power steering fluid reservoir thoroughly using a small quantity of new power
steering fluid of the specified type.
Allow the power steering fluid used to clean the power steering fluid reservoir to drain completely into a
suitable container.
Use a suitable syringe to aspirate any residue of the power steering fluid used for cleaning from the power
steering fluid reservoir.
Threaded union
Replace the relative seals and tighten the union
Tightening torque
Threaded union
D5.02).
35 Nm
(1).
Nm
Class
B
Nm
Class
35 Nm
B
Advertisement
