Advertisement
ONLY for vehicles WITH single oil heat exchanger. Refit the rear bumper (
ONLY for vehicles WITH single oil heat exchanger. Refit the silencer (
Refit both silencers.
Check the alignment of the exhaust system (
Refit the rear wheelhouses (
Refit both rear elements.
Refit the wheels (
Refit both rear ones.
Refit the rear flat undertray diffuser (
E3.05).
D2.01).
E3.12).
Tighten the nut (3) fastening the rear stabiliser
bar (A) to the left hand suspension tie-rod.
Repeat the procedure on the left hand
suspension.
Tightening torque
Nut
ONLY for vehicles WITHOUT single oil heat
exchanger
Always replace the spherical exhaust system
clamps with new components after
loosening.
Align the two exhaust extensions (7) with the
silencers (6), fitting new spherical clamps (2).
Tighten the spherical clamps (2).
Tightening torque
Spherical clamp
Fasten the cross member connecting the
silencers (1), tightening the screws indicated.
Tightening torque
Screw
B7.01).
Nm
50 Nm
Nm
35 Nm
Nm
25 Nm
E3.04).
B7.06).
Class
B
Class
B
Class
B
Advertisement
