Advertisement
CAUTION
To ensure safety, the straps must be located securely on the engine assembly, taking care not to crush any
cables or pipes.
Using a hydraulic jack or bridge crane with lift belts, place the engine assembly on the front removable
subframe, aligning the engine mounting struts precisely with the respective bushes and the
transmission housing bushing with the respective hole.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
On both sides, loosen the screws (82) fastening
the engine mounting bushes to the front
removable subframe.
Provisionally fasten the retainer bracket to the
gearbox mounting bush (85), hand-tightening
one of the two screws (77).
Advertisement
