Advertisement
Attach the eyebolt on the EPB Bowden cable to the relevant fork inside the hub carrier.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Tighten the indicated screws fastening the shock
absorber (B) to the chassis.
Tightening torque
Screw (pretightening)
Screw
Connect the connector (14) to the shock
absorber (B).
Magnetorheological shock absorbers (optional)
only.
Refit the three spacers (13) and tighten the six
screws (12) fastening the axle shaft (A) to the
differential flange.
Tightening torque
Screw
Insert the brake fluid hose (11) into the relevant
mounting bracket.
Tighten the brake fluid hose union (10).
Tightening torque
M12 Union
Refit the clip (9) fastening the union for the brake
fluid hose (11) onto the relevant mounting
bracket.
Nm
Class
20 Nm
A
110 Nm
A
Nm
Class
78 Nm
A
Nm
Class
16 Nm
B
Advertisement
