Advertisement
D4.03
Hub carriers
Removing the front suspension stub axle
The front stub axle or hub carrier is supplied as a spare part complete with wheel bearing.
Remove the front brake calliper (
Remove the brake discs (
Remove the front one.
Support the weight of the suspension adequately.
Remove the front wheel ABS sensor (
D3.05).
D3.03).
D3.06).
Remove the indicated cable grommets for the
ABS sensor cable (1) from the mounting
bracket.
Open the clip (2) and release the rigid brake fluid
pipe.
Remove the retainer clip (3) and unscrew the
union (4) from the hose.
Undo the nut (6) fastening the earth cable (5).
Undo the nut (8), retrieving the washer, and
detach the steering box tie-rod (9) from the
stub axle.
FROM Assembly No. 98482, there is a recess
on the ball stud to facilitate loosening the
nut (8).
Advertisement
