Advertisement
Fit the EPB Bowden cable (35) on the relevant
heat shield on the gearbox.
Tighten the two screws indicated (36) fastening
the EPB Bowden cable (35) to the heat shield
on the gearbox.
Tightening torque
Screw
Fit the heat shield (34 )protecting the EPB
Bowden cable (35) in the relevant seat.
Tighten the screws indicated (36) fastening the
heat shield (34 )protecting the EPB Bowden
cable (35).
Tightening torque
Screw
UP TO Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Fit the EPB equaliser (30) in the relevant
mounting bracket (26) and move towards the
right.
Attach the EPB Bowden cable sheaths to the
mounting bracket (26) for the EPB equaliser
(30), pressing the indicated fastener clips.
Attach the end (29) of the left hand EPB Bowden
cable onto the EPB equaliser (30).
Attach the end (27) of the right hand EPB
Bowden cable to the EPB linkage bracket
(28).
Take care not to damage the EPB linkage
bracket (28).
Nm
Class
6 Nm
B
Nm
Class
6 Nm
B
Advertisement
