Advertisement
Remove the outer cap from the bottle.
Remove the engine oil dipstick
Insert one end of the pipe in the engine oil
dipstick tube to immerse it in oil being
sampled.
Insert approximately the same length of tube as
the length of the engine oil dipstick.
Connect the bottle to the end of the tube.
Turn the valve by 90°.
Once the bottle is filled, close the valve by
turning back 90°.
Disconnect the bottle from the tune and refit the
outer cap.
Insert the engine oil dipstick fully.
Print out the specific label (annexed with
Technical Information) on adhesive paper,
compile the label with the information
requested and apply to the bottle.
Advertisement
