Advertisement
Refit the transmission shaft (
Refit the catalytic converters (
Connect the battery (
C4.02).
B7.03).
F2.01).
Make a yellow marking on the transmission shaft
flange indicating the precise position of the
yellow marking made previously on the
crankcase.
The position of the marking shown in the photo
aside is indicative only.
Undo the screw (10) of the tool
position the engine assembly correctly.
Tighten the screws (9) fastening the starter
motor to the transmission housing (A)
Tightening torque
Screw
(AS
107566) to
Nm
Class
25 Nm
A
Advertisement
