Advertisement
Refit the A.C. compressor - power steering pump - alternator drive belt (
Check the belt tension again as described previously.
Refit the central flat undertray section (
Removing the water pump drive belt
The water pump drive belt MAY BE INSTALLED ONCE ONLY.
The engine ancillary drive belt must be replaced at the intervals specified in the MAINTENANCE SCHEDULE.
Remove the central flat undertray section (
When fitting the new belt tensioner, ensure that
the locator pin (4) is correctly inserted in the
relative seat on the front engine cover.
Fit the belt tensioner (3) and fasten by tightening
the screw (2).
Tightening torque
Screw
E3.12).
E3.12).
Nm
25 Nm
A3.12).
Class
B
Advertisement
