Advertisement
Check the state of the protective foam rubber
pads (13) applied to the active carbon filter
mounting bracket; replace if necessary.
Fit the active carbon filter (A) on the relative
mounting bracket as originally installed and
fasten with the retainer bracket (12),
tightening the screw (11).
Tightening torque
Screw
Connect the pipes (17) to the active carbon filter
as originally fitted.
A "double-lock" safety clip is fitted on the lower
pipe connected to the active carbon filter.
After connecting the quick connector fuel pipe
correctly, with due caution and pressing on
both sides of the double-lock clip, push the
clip into its seat until it clicks audibly into
place and the pipe is secured correctly.
The difference between the safety
clip "unclicked" and "clicked" position is only
a few millimetres.
Nm
Class
5 Nm
B
Advertisement
