Advertisement
Repeat the timing adjustment procedure described above for the other cylinder bank.
Turn the crankshaft by a few revolutions and measure the timing values again.
Remove the dial gauges.
Refit the front engine cover (
Refit the complete engine (
Refitting the sump
Tightening torque
Fastening engine sump
B2.05).
B2.02).
Screw
Check that the reference markings indicated on
the camshafts are aligned with the reference
markings indicated on the front caps.
Clean the gasket seat on the crankcase
thoroughly.
Fit a new gasket (1), aligning on the respective
holes.
Nm
Class
10 Nm
B
Advertisement
