Advertisement
Replacing the front NRRPS motion sensors
Tightening torque
Fastening motion sensor mounting bracket -
chassis
The following procedure is for replacing the right hand front motion sensor.
The procedure for replacing the left hand front motion sensor is identical.
Disconnect the battery (
Remove the wheels (
Remove the right hand front wheel.
Refit the wheels (
Connect the battery (
Replacing the rear NRRPS motion sensors
Tightening torque
Fastening motion sensor mounting bracket -
chassis
The following procedure is for replacing the right hand rear NRRPS motion sensor.
The procedure for replacing the left hand rear NRRPS motion sensor is identical.
F2.01).
D2.01).
D2.01).
F2.01).
Screw
Disconnect the connector (1).
Detach the tie-rod (2) from the upper arm.
Undo the two screws indicated fastening the
mounting bracket for the right hand front
motion sensor (A).
Remove the right hand front NRRPS motion
sensor (A), complete with relative mounting
bracket, and replace.
Fit the new right hand front NRRPS motion
sensor (A) in its seat, complete with relative
mounting bracket.
Tighten the two screws indicated fastening the
mounting bracket for the right hand front
NRRPS motion sensor (A).
Tightening torque
Screw
Screw
Nm
Class
5 Nm
B
Nm
Class
5 Nm
Nm
Class
5 Nm
B
B
Advertisement
