Advertisement
Inspect the hydraulic clutch system oil level Shell DCT F-3 (
Refit the engine air duct (
Refit the rear flat undertray section (
B4.02).
E3.12).
Connect the clutch hydraulic oil system pipe
unions. Follow the instructions given below to
ensure proper connection:
ensure that the notch on the safety ring nut (12)
is aligned with the pin (13);
connect the male union and turn the safety ring
nut (12) so that it is no longer aligned with the
pin (13);
ALWAYS ensure that the pipe union is effectively
connected.
Connect the delivery and return unions (11) and
fasten to the mounting bracket (10).
Fasten the clutch hydraulic system oil pipes, by
fitting the clamps (8) and (12) and tightening
the screws (9).
Fasten the mounting bracket for the clutch
hydraulic system oil pipes (6), tightening the
screws (7).
A3.03).
Advertisement
