Advertisement
Refit the rear bumper (
Refit the rear wheelhouses (
E3.04).
E3.05).
Hand tighten the screw (7) fastening the pipe
connecting the filter to the chassis.
Fasten the pipe (6) to the OBD pump filter as
originally mounted, closing the clamp (8).
Fit the active carbon filter cover (1) and fasten by
tightening the screws (2).
The two lower screws also fasten the heat
shield mounting bracket onto the silencer.
Tightening torque
Screw
Nm
Class
6 Nm
B
Advertisement
