Advertisement
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Detach and disconnect the connector (4) for the
ABS sensor.
Detach the cable grommet (6) from the relevant
mounting bracket.
Undo the brake fluid hose union (10).
Remove the clip (11) fastening the union (12) for
the brake fluid hose onto the relative
mounting bracket.
Remove the union (12) for the brake fluid hose
from the relevant mounting bracket.
Using a delible yellow marker pen or paint, make
reference markings on the threaded rods and
relative nuts and the eyebolts of the Flanblocs
fastening the lower arm.
DO NOT use lubricants or electric/pneumatic
drivers.
Partially loosen the nuts fastening the lower arm
(C), retrieving the relative shims (8), in the
following order: (a), (b), (c), (d).
Advertisement
