Advertisement
Adequately support the weight of luggage compartment lid.
This operation requires at least two operators.
Remove the luggage compartment lid from the vehicle.
Refitting the luggage compartment lid
Adequately support the weight of luggage
compartment lid.
This operation requires at least two
operators.
Remove the clamp (7) fastening the cable
grommet.
Prise the cable grommet (8) out of the luggage
compartment lid and pull out the light
connector disconnected previously.
Mark the position of the hinge on the luggage
compartment lid to facilitate subsequent
reassembly
Undo the two screws (9) fastening the hinge to
the luggage compartment lid.
Adequately support the weight of luggage
compartment lid.
This operation requires at least two
operators.
Remove the clamp (10) fastening the cable
grommet.
Prise the cable grommet (11) out of the luggage
compartment lid and pull out the antenna and
ground cable connectors.
Mark the position of the hinge on the luggage
compartment lid to facilitate subsequent
reassembly
Undo the two screws (12) fastening the hinge to
the luggage compartment lid.
In the event of removing the Tonneau Cover
If the object of the operation is to remove the
Tonneau Cover, it is advisable to remove the
luggage compartment lid complete with
hinges. Leave the hinges fastened to the lid,
but remove them from the Tonneau Cover,
marking their respective positions beforehand
to facilitate subsequent reassembly; then
undo the two screws (14) for each hinge.
Advertisement
