Advertisement
Check that the wiring harnesses are routed correctly so that they will not be damaged or sheared by
moving the RHT kinematics.
Connect the battery (
With the engine running, press the relative button and close the RHT.
Check that the luggage compartment lid closes correctly and remains closed even when trying to force the
lid open.
F2.01).
NEW SOLUTION
Tighten the screws indicated by the black arrows.
Fit the clip indicated by the red arrow.
Fasten the cables to the clip (17).
Fit the strip (16) as originally fitted.
Detach the two hooks (15) (one per side)
fastening the luggage compartment lid to the
Tonneau Cover kinematics then lock the
luggage compartment lid in its original
position.
Check alignment with the bodywork; the lid must
be equidistant from the bodywork along the
entire perimeter. If the lid is incorrectly
aligned, loosen the hinge fasteners and
centre the lid correctly by adding or removing
shims underneath the hinges.
If the Tonneau Cover has been removed, also
align the hinges fastened to the Tonneau
Cover itself if necessary.
Advertisement
