Ferrari California Workshop Manual page 89

Refit the front wheelhouses (
Refit the central flat undertray section (
Connect the battery (
Replacing the front right oxygen sensor
E3.05).
E3.12).
F2.01).
Undo the rear oxygen sensor (B) from the
catalytic converter and replace.
Fit the rear oxygen sensor (B) onto the catalytic
converter and tighten it.
Tightening torque
Oxygen sensor
Attach the cable to the clamp (3).
Attach the cable to the clamp (2).
Fit a new plastic clamp in the position indicated.
Connect the connector (1).
Nm Class
50 Nm B