Advertisement
UP TO Assembly No. 95407, on both sides,
tighten the screws (81) fastening the engine
mounting strut to the engine mounting bush.
Tightening torque
Screw
FROM Assembly No. 95408, on both sides,
tighten the nuts (81) fastening the engine
mounting strut to the engine mounting bush.
Tightening torque
Nut
Lift the engine slightly to separate the engine
mounting bushes from the front removable
subframe and eliminate any strain in the
bushes, then lower the engine again.
On both sides, fit the rubber lined retainer
bracket for the oxygen sensor cables (80),
and tighten the indicated nut.
On both sides, fit the heat shield (79) around the
engine mounting bushes and fasten the
indicated clips.
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
On both sides, tighten the nuts (81) fastening the
engine mounting strut to the engine mounting
bush.
Tightening torque
Nut
Lift the engine slightly to separate the engine
mounting bushes from the front removable
subframe and eliminate any strain in the
bushes, then lower the engine again.
On both sides, fit the rubber lined retainer
bracket for the oxygen sensor cables (80),
and tighten the indicated nut.
On both sides, fit the heat shield (79), and
tighten the indicated screws.
Nm
Class
103 Nm
A
Nm
Class
103 Nm
A
Nm
Class
103 Nm
A
Advertisement
