Advertisement
Refit the front wheel ABS sensor (
Refit the brake discs (
Refit the front one.
Refit the front brake calliper (
Removing the rear suspension hub carrier
The rear hub carrier is supplied as a Spare part complete with wheel bearing.
D3.06).
D3.03).
D3.05).
Connect the right steering box tie-rod (9 B) to the
stub axle.
Fit the relative washer and tighten the nut (8)
fastening the steering box tie rod (9) to the
stub axle.
Pretighten the nut (8).
FROM Assembly No. 98482, there is a recess
on the ball stud to facilitate tightening the
nut (9).
Tightening torque
Nut (pretightening)
Loosen the nut (8) and tighten again.
Tightening torque
Nut
Fit the indicated cable grommets for the ABS
sensor cable (1) onto the mounting bracket.
Fasten the rigid brake fluid pipe and close the
clip (2).
Tighten the union (4) on the hose and fit the
retainer clip (3).
Tightening torque
M10 union
Tighten the nut (6) fastening the earth cable (5).
Tightening torque
Nut
Nm
Class
40 Nm
A
Nm
Class
40 Nm
A
Nm
Class
16 Nm
B
Nm
Class
6 Nm
B
Advertisement
