Advertisement
Place the wheel on the self-centring clamp and
use the bead breaker to ensure that the
wheel is gripped correctly by the clamps (2)
on the table.
If the machine is not equipped with a bead
breaker, clamp the wheel from the inside.
Clamp the wheel.
Observe the correct positions for bead
breaking shown as follows.
Position the inflation valve (A) at 12 o'clock.
Position the bead breaker disc (3).
Push the bead into the rim channel using the
bead breaker disc while simultaneously
turning the tyre counterclockwise, until the
inflation valve (A) is at 3 o'clock.
Lubricate the bead while turning.
To facilitate tyre removal, if necessary, insert a
bead breaker lever at 180° relative to the
sensor.
If the bead is not completely broken, repeat this
stage in a clockwise direction, moving the
inflation valve from 3 o'clock to 12 o'clock.
Perform this stage repeatedly, clockwise and
anticlockwise, until the bead is completely
broken.
Fit tool (4): after clamping, the tool automatically
moves upwards and outwards.
Position the inflation valve (A) at 11 o'clock.
Mount the lever (5) on tool (4), using the bead
breaker disc to facilitate the operation if
necessary.
Remove the bead breaker disc.
Advertisement
