Advertisement
Remove the yellow reference markings made
during removal.
Using an indelible red marker pen or paint, make
reference markings on the threaded rods and
relative nuts and the eyebolts of the Flanblocs
fastening the lower arm.
Connect the ground cable, tightening the
indicated nut (7).
Tightening torque
Nut
Fit the union (12) for the brake fluid hose onto
the relevant mounting bracket.
Refit the clip (11) fastening the union (12) for the
brake fluid hose onto the relative mounting
bracket.
Tighten the brake fluid hose union (10).
Tightening torque
M10 union
Nm
Class
6 Nm
B
Nm
Class
16 Nm
B
Advertisement
