Advertisement
Right-hand side
Take care not to damage or scratch the
cylinder head cover.
Fit the cylinder head cover (11) in its relative seat.
Apply and hand tighten all screws indicated.
Right-hand side
Pre-tighten the indicated screws in the sequence
given in the photo aside.
Tightening torque
Screw (pretightening)
Tighten the screws indicated in the sequence
given in the photo aside
Tightening torque
Screw
Left-hand side
Fasten the injection cable (7) to the cylinder
head cover, securing in the positions
indicated by the red arrows.
Connect the connector (13) and fasten to the
relative bracket.
Fasten the ground cable (8) by tightening the
indicated screw.
Tightening torque
Screw
Nm
Class
5 Nm
B
Nm
Class
11 Nm
B
Nm
Class
10 Nm
B
Advertisement
