Advertisement
ONLY for vehicles WITHOUT single oil heat
exchanger
Fasten the hydraulic clutch system oil pipes (53),
by tightening the screw (52) on the retainer
clamp.
Fit and secure the left hand injection cable (42),
tightening the fastener screws for the
indicated brackets.
ONLY for vehicles WITHOUT single oil heat
exchanger
Connect the hydraulic clutch system oil delivery
and return unions (49), following the same
procedure given above for the front unions,
and fasten to the mounting bracket (48).
Fit and fasten the clamps (45) and (46), by hand
tightening the screws (47).
Fit the mounting bracket (43) for the hydraulic
clutch system oil pipes, tightening the screws
(44).
Tightening torque
Screw
Nm
Class
20 Nm
B
Advertisement
