Advertisement
Pressing into place by hand, fit the rubber bushes on the stabiliser bar in the same position and orientation
noted during disassembly.
Fit the stabiliser bar complete with rubber bushes.
Apply 1 ml of grease DuPont Lubricants
Krytox® 205 GPL Standard Grade Grease
uniformly on the inner surfaces of the rubber
bushes.
Turning with the arrow pointing towards the
interior of the vehicle, fit the bracket (D)
retaining the bush (C).
Using a cloth moistened with heptane,
thoroughly clean and degrease the outer
surface of the rubber bush (C) and the inner
surface of the bracket (B).
Fit the bracket (B) on the respective bush (C).
Tighten the screws indicated.
Tightening torque
Screw
Remove any excess grease from the rubber
bush (C) and bracket (B).
Nm
Class
30 Nm
B
Advertisement
