Advertisement
Rear left hand wheel brake shoes
Move the EPB equaliser (C) to the left.
Detach the end (3) of the left hand EPB Bowden cable (D) from the
EPB equaliser (C).
Press on the two indicated fastener tabs and remove the left hand EPB
Bowden cable sheath (D) from the relevant mounting bracket.
Detach the cable grommet (4) from the bracket on the right hand EPB
Bowden cable sheath (B).
Undo the nut (5) fastening the ground cable onto the bracket on the
right hand EPB Bowden cable sheath (B).
Undo the indicated screw fastening the right hand EPB Bowden cable
sheath (B) onto the rear right hand hub carrier.
Detach the eyebolt (6) on the right hand EPB Bowden cable (B) from
the fork (7) inside the hub carrier.
Release the spring (8) and recover the adjuster pin (9).
Do not disassemble the adjuster pin or alter its setting to ensure that
the shoes are refitted in their original positions.
Remove the upper spring (10) by pushing towards the brake shoes and
then turning.
Remove the lower spring (11) by pushing towards the brake shoes and
then turning.
Advertisement
