Advertisement
Check that there is no leakage from the drain plug, the filter and the delivery and return unions
disconnected during the draining procedure.
Refit the rear flat undertray section (
Clean the plug (1) thoroughly with a suitable
degreaser that does not leave residue and
replace the seal.
Tighten the plug (1).
Tightening torque
Plug
Remove the plug (7) for the gearbox speed
sensor seat, located at the top left of the
gearbox housing, undoing the indicated screw
and retrieving the relative seal.
Use a pump to aspirate the specified oil from a
new container.
Using the pump, fill with a total of 4.6 litres
(gearbox + external cooling circuit) via the
speed sensor orifice.
Refit the plug (7) for the gearbox speed sensor
seat, replacing the relative seal and tightening
the indicated screw.
Tightening torque
Screw
E3.12).
Nm
Class
49 Nm
B
Nm
Class
5 Nm
C
Advertisement
