Advertisement
C4.04
Flywheel
Removing the flywheel
Remove the transmission housing (
Immobilise the crankshaft.
Refitting the flywheel
Tightening torque
Fastening flywheel to crankshaft
C4.03).
Undo the indicated screws in a cross pattern.
Note that while the starter motor has been
Remove the flywheel (A).
Pretightening torque for
screw
Screw
FROM Engine No. 181233
Remove the O-rings (1) and replace.
Clean and degrease the flywheel splining
thoroughly.
Carefully fit the new O-rings (1) in the respective
seats on the flywheel splining.
removed in the photo aside, its removal is
not necessary.
Nm
45 Nm
91 Nm
Class
A
A
Advertisement
