Ferrari California Workshop Manual page 632

Hide thumbs Also See for California:

Check that the yellow reference markings are

correctly aligned: the markings on the

threaded rods and the markings on the

Flanbloc eyebolts must be aligned.

Remove the yellow reference markings made

during removal.

Using an indelible red marker pen or paint, make

reference markings on the threaded rods and

relative nuts and the eyebolts of the Flanblocs

fastening the upper arm.

Tighten the indicated screws fastening the shock

absorber (D) to the chassis.

Tighten in a crossed pattern.

Tightening torque

Screw (pretightening)