Advertisement
Refitting the water/gear oil/clutch hydraulic system oil single oil heat exchanger
Tightening torque
Fastening single oil heat exchanger to mounting
subframe
Fastening clutch hydraulic system pipes to single
oil heat exchanger
Products to use: AREXONS SYSTEM 52A43 -
MEDIUM STRENGTH THREAD LOCK
Fastening gear oil pipes to single oil heat
exchanger
Products to use: AREXONS SYSTEM 52A43 -
MEDIUM STRENGTH THREAD LOCK
Fastening coolant pipes to single oil heat
exchanger
After loosening or removal, the Caillau Visa hose clamps must be replaced with Mikalor worm drive
hose clamps, following the instructions given in Technical Information 2054 of December 2012.
Undo the indicated single oil heat exchanger
fastening nuts (A) to the relevant mounting
subframe.
Move the pipes to one side as much as possible
and pull backwards the single oil heat
exchanger (A) from the stud bolts.
Nut
Screw
Screw
Screw collar
Move the pipes as much as possible to one side
and fit the single oil heat exchanger (A) on
the mounting subframe, locating it on the stud
bolts.
Tighten the indicated single oil heat exchanger
fastening nuts (A) to the relative mounting
subframe.
Tightening torque
Nut
Nm
Class
9 Nm
B
8 Nm
B
8 Nm
B
4 Nm
B
Nm
Class
9 Nm
B
Advertisement
