Advertisement
Adjusting tension of exhaust system vibration dampers
Tightening torque
Mounting bracket - silencer
Fastening heat shields to rear removable subframe Screw
Check the tension of the exhaust system vibration dampers (
FROM Assembly No. 103179 (consult the Spare Parts Catalogue
to identify vehicles not affected by modification), if the
measurements comply with the values indicated
Fit both vibration dampers (3) on the central silencer and tighten
the indicated nuts.
Tightening torque
Nut
Check the tension of the exhaust system vibration
dampers (
Nut
B7.01).
Lateral silencer vibration dampers
Support the weight of the silencer (A).
Loosen the indicated nuts.
Lift the mounting bracket (B) to relieve the tension on the damper
and allow adjustment to the distance indicated.
Tighten the nuts indicated.
Tightening torque
Nut
Rear silencer vibration dampers
Support the weight of the silencer (A).
Loosen the indicated nuts.
Lift the mounting bracket (B) to relieve the tension on the damper
and allow adjustment to the distance indicated.
Tighten the nuts indicated.
Tightening torque
Nut
Nm
25 Nm
B7.01).
Nm
Class
25 Nm
8 Nm
Nm
25 Nm
Nm
25 Nm
Class
B
B
B
Class
B
Class
B
Advertisement
