Advertisement
Remove the yellow reference markings made
during removal.
Using an indelible red marker pen or paint, make
reference markings on the stud bolts and
relative nuts and the eyebolts of the Flanblocs
fastening the upper arm.
Tighten the indicated screws fastening the shock
absorber (A) to the chassis.
Tighten in a crossed pattern.
Tightening torque
Screw (pretightening)
Screw
FROM Assembly No. 103179 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Tighten the screws indicated fastening the shock
absorber (A) to the chassis.
Tightening torque
Screw (pretightening)
Screw
Nm
Class
10 Nm
A
30 Nm
A
Nm
Class
20 Nm
A
110 Nm
A
Advertisement
