Ferrari California Workshop Manual page 184

Undo the screws indicated.
During the removal of the old engine, the pipe
(B) must be disconnected from the pipe (C),
by undoing the indicated screw.
Loosen the hose clamp (1).
Open the rubber lined clip (2) by undoing the
indicated screw.
Disconnect and remove the old pipe (C).
Fit and connect the new pipe (D).
Tighten the hose clamp (1).
Close the rubber lined clip (2) by tightening the
indicated screw.
Tightening torque
Screw
Nm Class
8 Nm B