Advertisement
E3.05
Wheelhouse
Removing the front wheelhouses
These consist of two elements which may be removed independently of one another.
Where they overlap, the two elements are both fastened by the same screw.
Remove the wheels (
Refitting the front wheelhouses
Tightening torque
Fastening wheelhouse
In the interference zone, the front element must be located above the rear element and the two elements are
fastened with a single screw.
D2.01).
Front element
Remove the five fasteners (1): undo the three
screws and prise out the two plastic inserts.
Remove the front element (A).
Rear element
Remove the six fasteners (2): undo the three
screws and prise out the three plastic inserts.
Remove the rear element (B).
Screw
Nm
Class
2.5 Nm
C
Advertisement
