Advertisement
ONLY for vehicles WITH single oil heat
exchanger UP TO Assembly No. 91552
Apply AREXONS SYSTEM 52A43 - MEDIUM
STRENGTH THREAD LOCK on the thread of
the specified screw.
Replace the O-ring then connect the engine
coolant delivery pipe (24) to the block (44).
Fasten the pipe (24), fitting the retainer fork (23)
and tightening the indicated screw.
Tightening torque
Screw
ONLY for vehicles WITH Single Oil Heat
Exchanger FROM Assembly No. 91553 UP TO
Assembly No. 103178 (consult the Spare
Parts Catalogue to identify vehicles not
affected by modification)
Connect the engine coolant delivery pipe (24) to
the rigid pipe (44), fastening the indicated
quick release connector.
ONLY for vehicles WITH Single Oil Heat
Exchanger FROM Assembly No. 103179
(consult the Spare Parts Catalogue to identify
vehicles not affected by modification)
Connect the coolant pipe (24) to the rigid pipe
(44).
Tighten the indicated screw collar.
Nm
Class
8 Nm
B
Advertisement
